Sea-Line® Epoxid works in both the construction and repair of damaged parts of the boat. This resin is recommended for laminating, sealing, enhancing the surface, bonding and linking the various elements of the structure. In conjunction...

Fast curing, transparent, two-component glue with extreme strong stability. Connects elastic and shock resistant with high tensile strength. Bonds metal, glass, stoneware, ceramic, wood and most of hard plastics.

Epoxy resin with fast hardener, pot life: about 15min at 21° C. Best used for the majority of applications and at lower temperatures. Fast curing at room temperature. With two mixing cups. Mixed 2 to 1

2-K epoxy putty for multipurpose use over and above the waterline. Recommend for GRP, CRP, steel, aluminium and hard wood.

Epoxy resin with slow hardener, pot life: about 30min at 21° C. Best used when extended working and cure time is needed at higher temperatures. Has excellent bonding and laminating properties. With two mixing cups. Mixed 2 to 1

The additive CS contains colloidal Silicia and is used to thicken the epoxy compound while working on vertical and overhead surfaces. This often used filler can be combined with other additives. Added 3-6% by weight to the epoxy...

For repairs below the waterline. Repairs blisters from osmotic damage, keel/hull faring, and holes easily, water resistant. Lamination strength up to 10mm. High-build easy-to-sand formula fills minor imperfections, hairline cracks, prior...

All you need for rapid and simple epoxy repairs. The set includes sandpaper, filler and glass cloth (225g / m², 5 cm width, 1m length). The solvent-free epoxy resin designed for universal use bonds, strengthens and repairs both...

Woven glass fibre cloth for laminates requiring good transparency. For polyester and epoxy resin.

The additive blend FB is best for filleting. Mixes best with epoxy and gives smooth filleting surfaces which can be sanded easily. Added 35-60% by weight to the epoxy compound. Colour: off-white

2-K epoxy putty mixed with fibres to fill deep holes or to repair GRP, CRP, steel, aluminium and hard wood. Suitable for all applications where mechanical resilience, high strength and excellent water resistance is needed

Reinforcing agend for epoxy.

The microfibres MF additive is used as reinforcement and thickening additive. It creates a multi purpose adhesive. Provides good gap-filling. Added 4-18% by weight to the epoxy compound. Colour: white

2-K epoxy light filler for application above and below the water-line. Excellent water resistance and very easy to sand. Can be used for osmosis treatment. Suitable for GRP, metal, aluminium and wood.

Reinforcing agend for epoxy.

Repair kit for fast and easy repairs to epoxy, polyester, wood, metal and plastics used in boat building. Set contains Resin, fabric and hardener.

The additive blend HD is best for high density bonding and filleting. Best to reinforce surfaces where high loads are anticipated (like deck equipment). Can be used for filleting and gap-filling. Added 35-60% by weight to the epoxy...

The additive MB is a micro light additive which contains micro balloons. Can be best used to fill low areas and build-up surfaces. The product can be shaped and sanded easily. Added 7-16% by weight to the epoxy compound. Colour: white

Yachticon Epox 5:1 is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at higher temperatures. Properties: Forms a high-strength moisture resistant solid...

Woven glass fibre cloth for laminates requiring good transparency. For polyester and epoxy resin.

Very light repair filler (light grey, density about 0,85) suited for under and above the water line. • suitable for profiling large areas and coats up to 20 mm • no unneeded weight increase • easy to sand, water resistant • excellent for...